Unit of measure (MOQ): 1 Yard – .001” thick x 24” wide x 1 yard long

Description: Non-perforated parting film is used in the vacuum bagging process to serve many purposes, the main reason we use this material in the final bagging process is due to the fact that it can withstand temperatures up to 400 degree F. and it can be in direct contact with the composite part without bonding.  This material does have great elongation properties for use over contoured parts.  When used correctly the non-perforated parting film will make the laminate smoother and achieve higher resin content by encapsulating the resin in the part and minimizing the resin flow out of your layup during the cure.  This material is also commonly used a parting film when temporary bagging plies, protecting the composites this is ideal for most vacuum bag applications.

Application: To start the application process, cut the material to the desired size and dimensions. Apply to the side that does not to be bonded or contaminated.  Make sure the parting film is laying flat with no wrinkles, once satisfied proceed with the layup process. After the material has cured simply remove the parting film for a clean contaminated free surface.