Unit of Measure (MOQ): 1 Each

Description:

This Advanced Composite Repair Training Kit includes all of the required materials to perform up to (4 Repairs):

Advanced Composite Sandwich Panel 12” x 12”.

- 1 Ply F/G (7781) (0/90)

- 2 Plies Kevlar (285) (0/90)   

- ½”” Nomex Honeycomb  

- 2 Plies Graphite 3K-70-PW (+/- 45)

- 1 Ply F/G (7781) (0/90)

Qty (1) 3” x 3” Piece of ½” Nomex Honeycomb

Qty (1) 6” x 6” Piece of Core Splice/Foaming Adhesive .050”)

Qty (2) 6” x 12” Piece of Adhesive Film (AF163-2K .06Wt.)

Qty (2) 6” x 12” Piece of Graphite 3K-70-PW Pre-preg

Qty (2) 6” x 12” Piece of Kevlar (Style 285) Pre-preg

Qty (2) 6” x 12” Piece of Fiberglass (Style 7781) Pre-preg

Application:

You will want to start by causing damage to the panel using a method of your choice.  Metal hammers works well, or even the sharp corner of a metal table.  We suggest that you start about 4” in from a corner.  This will allow you to use the panel for additional training at a later date. 

Once you have identified the damage you are ready to start the repair process as required. 

NOTE: Cure all material for 90 minutes at 260 Degree +/- 10 Deg. F

          Maintain a minimum of 22” of vacuum during the cure process

Equipment needed: (1) Vacuum system capable of pulling a minimum of 22”Hg. (See VACSYSKITECONL) (2) Oven capable of 260 Deg minimum (See EOVEL-350)

Bagging Materials Needed: See - Vacuum Bagging Materials

Shop Supplies Needed: See – Shop Supplies