Unit of measure (MOQ): 1 Yard – .003” thick x 19” wide x 1 yard long

Description: BMTCFNP is used when a clean surface is required. When used correctly the Teflon coated fiberglass will make the laminate smoother and achieve higher resin content. Having the capability to work up to 400 degrees this is the ideal low cost versatile release film that can be placed directly over the tool surface in place of a parting agent. Teflon coated fiberglass is designed to release from all commercial resin systems without the transfer of the resin. It can also be used directly over the top of the composite material in the bagging process. Keep in mind that this material does not stretch; it has no elongation properties at all. It should only be used in applications that do not have radius or multi contours.

Application: To start the application process, cut the material to the desired size and dimensions, it should extend at least 2” beyond the largest composite ply, and maybe even larger when using it with a wet layup process. Make sure the BMTCFNP is laying flat with no wrinkles, once satisfied proceed with the layup or bagging process. After the material has cured, simply remove the BMTCFNP for a clean contaminated free surface. This material can be reused several times before discarding.